Power supply

230V ac or 110V ac

Max load

5A @ 230V (1150 W)

Receiver current draw

Maximum of 100VA max

Fuses

Auxiliary fuse F2 5A T (20mm ceramic cartridge)

Outputs

Total maximum of pan/tilt/lens and 24V ac auxiliary is 100VA

Auxiliary outputs for wash/wipe/lights (1000W max)

Driven at supply voltage or 24V ac selectable by SW2

Video input

1V p-p 75Ω terminated input via BNC socket

Video output

1V to 4V p-p 75Ω impedence via BNC socket

Video launch amplifier gain locally & remotely adjustable

Lens drives

(remotely adjustable)

Zoom and focus - adjustable between 6 - 12V dc

Inching speed - adjustable between 0 - 12V dc.  1 second inching built in. 

Iris output - can be set either direct drive for 3 motor lens or auto iris override voltage.

In auto-iris mode, the output returns to the preset level 15 seconds after manual iris control.  Preset level is adjustable.

Each output has red and green LEDs to indicate direction and voltage.

Presets

Lens 10 bit resolution

Head 12 bit resolution

Inputs are provided for pan, tilt, zoom & focus preset feedback pots.

Up to 32 full scene presets can be stored within the receiver, i.e. pan, tilt, zoom and focus.  (16 with BBV & Baxall up the coax protocols)

Alarm facilities

8 alarm inputs from volt free normally closed contacts

Output is 1 normally closed volt free contact which can be set to operate either immediately or when the preset is approached after an alarm input. 

NOTE:  The output is used for iris override when using Fujinon or Pentax lens mode.

Additional facilities

Software random pan

Sequential preset patrol with individual programmable preset dwell.

Datum - return to preset 1, start preset patrol or random pan after menu programmable duration of inactivity.

Features

LED readout for continual system status.

Programming menu with on screen display.

12V dc/500mA unswitched output provided.

Colour coded outlets - live, neutral, earth and low voltage.