Technical Specification

Power requirements
230V 50Hz, options for 110V ac or 24V ac

Max load
5Amp at 230 volts

Receiver current draw
100VA max

Fuses
Auxiliary fuse (F2) slow blow (rating dependent on supply and output voltage)

Outputs

• Variable pulse width modulated 24V dc output for pan & tilt
• 24V dc output for pan & tilt motor brakes
• Lens output for zoom, focus and auto iris override adjustable between 3 - 12V dc 150mA max
• 240-volt outputs for wash, wipe and lights (1KW max)
• A single volt free, normally closed, alarm output contact
• Video output 1V p-p to 4 V p-p adjustable with H. F. lift
• Camera power supply 12V dc 500mA and 230V ac

Facilities/Options

• Unit auto tunes to the coaxial telemetry signal
• LED readout for continual system status
• Diagnostic test switch (SW8) activates each function for two seconds in turn
• Video launch amplifier with Gain and Lift controls
• Camera power outlet provided
• Colour coded outlets- live, neutral and earth, low voltage
• 24 volt option available from factory, plugs into J5 (pre wired)

Telemetry signals
Up-the-coax FSK telemetry designed to operate up to 250m of RG59 or 500m of CT125 coaxial cable or via 20mA current loop twisted pair (star wired).

Auto - iris output
Allows iris override feature when used with supported lens. Returns to original setting 15 seconds after key release. Level programmable from keypad.

Video input
1V p-p 75R terminated input via BNC socket

Video output
1V p-p to 4v p-p 75R impedance via BNC socket

Lens drive
Lens drive voltage is adjustable on board between 3 - 12V dc. A one second slow, inching, feature is also adjustable on board between 0 & 100% speed. Each lens output carries a bi-colour LED indicating lens drive direction and speed.

Presets
Up to 16 full-scene preset can be stored within the receiver with 10 bit resolution. Each preset consisting of pan, tilt, zoom and focus position. (requires preset head & lens).

Boxed size
190mm (w) x 380mm (l) x 130mm (h)

Boxed weight
2.8Kg

Temperature range
- 10°C +40°C

Protection Rating IP67

Features

• Simply set up from the control unit, 16 full scenes are programmable.
• Positioning control of up, down, zoom and focus are available for each scene.
• No additional cabling required. Operates up to 500m of RG59 or up to 500m of CT125 standard coaxial cable.
• Built in launch amplifier provides cable loss compensation for optimum picture quality.
• Self tuning facility ensures reliable operation even when operating up to 500m of CT125 coax cable.
• 230V ac operation with options for 24V ac or 110V ac.
• Will operate on 20mA current loop as standard for situations where coax control is impractical.
• Supports local diagnostics and test facility.
• Auto iris override provides manual control of the lens iris from the keyboard - a safety feature, to protect the imaging device, returns the lens to automatic operation 15 seconds after the manual control button is released.
• 2 patrol modes for varying operational requirements.
• 8 local alarm inputs and 1 alarm output minimises cabling requirements.
• 12V dc available to power low voltage cameras.
• Serial port for direct connection to certain cameras (JVC TK-C1360 as standard).

Notes