Product Details

The RX100 range offers a simple solution for applications where there is a need to control a variety of pan and tilt mechanisms. The receiver offers considerable opportunities for upgrading existing BBV telemetry systems as it is now possible to add a wide selection of domes to the system. (See Technical Specification for details).

PART NUMBER AND DESCRIPTION:

RX100 Dome Interface Receiver

RX100/24 Dome Interface Receiver with 230V ac input and 24V ac output

97002

Technical Specification

Power Requirements
RX100: 9 - 12V ac / dc

Rx100/24: 230V ac or 24V ac

Max Load
100mA at 12V

Outputs
RS232, RS422, RS485 serial data (dome specific)

Facilities

Unit auto tunes to the coaxial signal
LED readout for continual system status
Video launch amplifier provided with gain and lift adjustment
Colour coded outlets: live, neutral, earth and low voltage

Telemetry signals
Up-the-coax telemetry signals designed to operate over 250m of RG59 or 500m of CT125 coaxial cable or via twisted pair 20mA current loop.

Lights Output
Switches up to 1Kw of lighting

Video Input
1V p-p 75Ω terminated input via BNC socket

Video Output
1V to 4V p-p 75Ω impedance via BNC socket

Dimensions

Part Number	Dimensions	Weight
RX100	280mm (w) x 190mm (l) x 130mm (h)	0.6kg
RX100/24	380mm (w) x 190mm (l) x 130mm (h)	2kg

Temperature range
-10°C to +40°C

Protection
IP67

Compatible with the following:

360 Vision, Borsatec (BT2790FF), Chugai (SMD-0811, SMD-12, SMD-12ii, SMD20), Dennard (20XX), Diamond Smartscan, Dynacolor (7720), Forward Vision (MIC1300), Kalatel Cyberdome (Jan 2002 or later firmware),
Merit Lilin (PIH-717X/7000/7600/7625PF/7625DWPF) Mark Mercer (D250MPT), Panasonic (WV-CSR400/600/650), Panasonic (WV-CS850/860/960), Pelco Spectra & Esprit (Pelco P Protocol), Philips/Bosch, Samsung (SCC-641), Sanyo (VCC-9200P), Sensormatic Speed Dome (RS422 Only), Sony (EVI-D31/1000), Star (MD-800/1200s/1200h/2000), Ultrak KD6, VCL-TP, Vicon Surveyor, Videcon Dome, Videcon Camera (VCP451), Vista Power Dome.

Please contact Building Block Video for further information if your dome does not appear in this list.

Features

Compatible with both fixed speed and proportionally controlled variable speed domes
No additional cabling required. Designed to operate over 500m using standard CT125 coaxial cable
Video launch amplifier provides loss compensation for optimum picture quality
4 local alarm inputs are available. When activated these will call up pre-sets 1 - 4
Will operate on 20mA current loop as standard for situations where coax control is impractical (Some domes are coax telemetry only - check with BBV first)
Common alarm out contact (momentarily opens on alarm)
On board lights relay operated from the transmitter keyboard for switching loads of up to 1Kw
Low voltage supply
Compatible with all BBV telemetry transmitters and equipment using BBV up-the-coax telemetry eg: DM DS2/BX2, Adpro AMUX, Sanyo DVR, Tecton Darlex
Simple to install. No specialised knowledge required
Rx100/24 powered from 230V ac with 24V ac 100VA dome supply output
The Rx100/24 can also be powered from 24V ac

RX100 Dome Interface Receiver

Product Details

Technical Specification

Features

Notes