BBV CCTV home » products » protocol converters » rx10x

RX10X Multi Protocol Dome Interface Receiver

Product Details

The RX10X is designed to offer a simple solution for applications where there is a need to control a variety of 3rd Party Dame Camers. The receiver offers considerable opportunities for upgrading existing BBV telemetry systems as it is now possible to add a wide range of integrated domes into the system.

Technical Specification

Power Requirements
12 – 36Vdc or 24V ac

Max Load
100mA at 12V

Outputs
RS232, RS422, RS485 serial data (dome specific)

Facilities

Unit auto tunes to the coaxial signal
LED readout for continual system status
Video launch amplifier provided with gain and lift adjustment

Telemetry signals
Up-the-coax telemetry signals designed to operate over 250m of RG59 or 500m of CT125 coaxial cable or via twisted pair 20mA current loop.

Video Input
1V p-p 75Ω terminated input via BNC socket

Video Output
1V to 4V p-p 75Ω impedance via BNC socket

Dimensions

Part Number	Dimensions	Weight
RX10X	69mm (w) x 57mm (l) x 36mm (h)	0.5kg

Temperature range
-10°C to +40°C

Protection
IP20

Compatible with the following:

Dennard (20xx), Genie ASD276 & ASD376, JVC TK-C655B, 675B & 676, Panasonic (WV-CSR400/600/650), Panasonic (WV-CS850/860/960), Pelco Spectra & Esprit (Pelco P Protocol), Philips/Bosch, Sensormatic Speed Dome (RS422 only), VCL-TP, Vicon Surveyor, Videcon Dome, Videcon Camera (VCP451) and Vista Powerdome.

Features

Compatible with both fixed speed and proportionally controlled variable speed domes

No additional cabling required. Designed to operate over 500m using standard CT125 coaxial cable

Video launch amplifier provides loss compensation for optimum picture quality

Will operate on 20mA current loop as standard for situations where coax control is impractical (Some domes are coax telemetry only - check with BBV first)

Low voltage supply

Compatible with all BBV telemetry transmitters and equipment using BBV up-the-coax telemetry

Simple to install. No specialised knowledge required

The Rx10X can also be powered from 24V ac

Notes

Coax Telemetry Interfaces
Legacy Products
Accessories
Pick-A-Point (GUI)
Matrices
High Resolution
Protocol Converters
Receivers
Transmitters & Telemetry Controllers
Twisted Pair