Product Details

The RX200 offers control of ac driven pan only or wash / wipe / lights for static cameras. The compact dimensions of the PCB allow it to be fitted within a camera housing or dome as an alternative to the more usual weather proof enclosure.

PART NUMBER AND DESCRIPTION

RX200/WBX	Telemetry Receiver for static cameras, ac output
RX200/WBX/24	Telemetry Receiver for static cameras, 230V ac input, 24V ac output
RX200/WBX/24/24	Telemetry Receiver for static cameras, 24V ac input, 24V ac output
RX200/WBX/110/110	Telemetry Receiver for static cameras, 110V ac input, 110V ac output
RX200/WBX/110/24	Telemetry Receiver for static cameras, 110V ac input with 24V ac output
RX200/PCB	Telemetry Receiver for static cameras, PCB only

93003

Technical Specification

Power requirements
230V 50Hz, options for 110V ac or 24V ac

Max load
5A at 230V

Receiver current draw
6VA max

Fuses
Auxiliary fuse (F2) slow blow (rating dependent on supply and output voltage)

Outputs
5 single pole change over relays (snubbed)

Left motor
Right motor
Wiper
Washer or Autopan (switch selectable)
Lights

Facilities/Options

Unit auto tunes to the coaxial telemetry signal
LED readout for continual system status
Diagnostic test switch (SW8) activates each function for two seconds in turn
Video launch amplifier with Gain and Lift controls
Camera power outlet provided
Colour coded outlets- live, neutral and earth, low voltage
24V output option available from factory, plugs into J5 (pre wired)

Telemetry signals
Up-the-coax FSK telemetry designed to operate up to 250m of RG59 or 500m of CT125 coaxial cable (assuming ideal conditions) or via twisted pair 20mA loop (1200 baud, even parity, 8 data, 1 stop bit)

Auto iris output
Returns to original setting 15 seconds after key release. Level programmable from keypad

Video input
1V p-p 75Ω terminated input via BNC socket

Video output
1V p-p to 4V p-p 75Ω impedance via BNC socket

Boxed size

Part Number	Dimensions	Weight
RX200/WBX	130mm (w) x 190mm (d) x 130mm (h)	2.4kg
RX200/PCB	108mm (w) x 108mm (d) x 38mm (h)*	0.4kg

(*Above PCB without IEC inserted)

Temperature range
-10ºC - +40ºC

Protection Rating: IP67

Supply/Output Options

Part Code	Supply	Output
RX200	230V ac	230V ac
RX200/24	230V ac	24V ac
RX200/110/110	110V ac	110V ac
RX200/110/24	110V ac	24V ac
RX200/24/24	24V ac	24V ac

PCB version suffix: /PCB
Boxed version suffix: /WBX

Features

No additional cabling required. Operates up to 250m of RG59 or 500m of standard CT125 coaxial cable
Built in launch amplifier provides cable loss compensation for optimum picture quality
Self tuning facility ensures reliable operation even when operating up to 500m of CT125 coax cable
Various supply options, 24V ac / 110V ac / 230V ac (230V ac as standard)
Will operate on 20mA current loop as standard for situations where coax control is impractical
Supports local diagnostics and test facility
Compact design allows various mounting options
Compatible with all BBV telemetry transmitters
Random pan function which does not require an autopan card
Optional 24V ac output for low voltage heads

RX200 Telemetry Receiver for static cameras

Product Details

Technical Specification

Features

Notes