Product Details

The RX35X is a multiple protocol telemetry receiver with ac pan and tilt outputs. It supports addresses 1 - 32 and allows entry level control of ac pan/tilt and zoom/focus with a wiper auxiliary output. Please see the Technical Specification page for details of supported protocols. The compact dimensions of the PCB allow it to be fitted within a camera housing as an alternative to the more usual weather proof enclosure.

The auto iris override feature (with appropriate lenses) caters for difficult mixed lighting conditions and greatly increases the ability of the system to resolve reflective surfaces such as car number plates.

The unit is suitable for 230V mains operation. As a factory fitted option, the receiver can be supplied to operate from 24V ac or 110V ac. This option must be specified at the time of the order.

Part number and description

Part number	Description
RX35X	RS485 Telemetry receiver 230V ac input 230V ac output
RX35X/PCB	RS485 Telemetry receiver 230V ac input 230V ac output PCB only
RX35X/24	RS485 Telemetry receiver 230V ac input 24V ac output
RX35X/24/24	RS485 Telemetry receiver 24V ac input 24V ac output
RX35X/24/24/PCB	RS485 Telemetry receiver 24V ac input 24V ac output PCB only
RX35X/110/110	RS485 Telemetry receiver 110V ac input 110V ac output
RX35X/110/110/PCB	RS485 Telemetry receiver 110V ac input 110V ac output PCB only
RX35X/110/24	RS485 Telemetry receiver 110V ac input 24V ac output

Technical Specification

Power supply	230V 50Hz options for 110V ac or 24V ac
Max load	5A at 230V
Standby current	6VA
Fuses	Auxiliary fuse (F2) slow blow (rating dependent on supply and output voltage)
Outputs	5 single pole change over relays (snubbed) 1. Left motor 2. Right motor 3. Up motor 4. Down motor 5. A single auxiliary wiper output 6. Zoom drive 7. Focus drive 8. Iris override
Features/options	LED readout for continual system status Diagnostic test switch (SW8) activates each function for 2 seconds in turn Video launch amplifier with gain and lift controls Camera power outlet provided Colour coded outlets - live, neutral and earth, low voltage 24V output option available from factory, plugs into J4 + J5 (pre wired)
Telemetry	RS485 or RS422 Simplex
Supported Protocols	BBVRS422 @ 9600 N 8 1 Pelco P @ 4800 N 8 1 Pelco P @ 9600 N 8 1 Pelco D @ 2400 N 8 1 Pelco D @ 9600 N 8 1 Sensormatic RS422 @ 4800 N 8 2* Molynx D-Type Telemetry @ 9600 E 8 1 Vista RS485 @ 9600 N 8 1 Vista RS485 @ 19200 N 8 1 VCL RS485 @ 9600 N 8 1 Vicon RS422 @ 4800 N 8 1* Vicon RS422 @ 9600 N 8 1* Vicon RS422 @ 19200 N 8 1*
*NOTE: this is a 2 wire receiver. This means it will not give responses back to the control system.
Auto iris output	Returns to original setting 15 seconds after key release. Level programmable from keyboard
Video input	1V p-p 75Ω terminated via BNC socket
Video output	1V p-p to 4V p-p 75Ω impedence via BNC socket
Temperature range	-10°C to 40°C
Installation	Supplied in a molded polycarbonate box rated to IP67. The box has mounting holes allowing easy installation
Dimensions	Boxed	PCB
Width	380mm	203mm
Depth	190mm	108mm
Height	130mm	38mm
Weight	2.4kg	0.4kg

Features

Simply set up from the control unit
No additional cabling required. Supports RS485 Molynx D type telemetry
Built in launch amplifier provides cable loss compensation for optimum picture quality
Various supply options, 24V ac/110V ac/230V ac (230V ac as standard)
Supports local diagnostics and test facility
Auto iris override provides manual control of the lens iris from the keyboard, a safety feature to protect the imaging device; automatically returns the lens to automatic operation 15 seconds after the manual control button is released
Compact design allows various mounting options
Auxiliary output available for wipe function
Receiver compatible with multiple video transmission standards

RX35X RS485 Telemetry Receiver

Product Details

Technical Specification

Features

Notes